|
Tool Force A-C1 50 PSI 2-in-1 HVLP Spray Gun |  | Brand: Tool Force
Category: Home Improvement
List Price: $69.95
Buy New: $34.19
as of 11/22/2009 10:49 CST details
You Save: $35.76 (51%)
Seller: Amazon.com
Rating:  6 reviews
Media: Tools & Hardware
Number Of Items: 1
Shipping Weight (lbs): 3.3
Dimensions (in): 9.1 x 5.4 x 4.8
Model: A-C1
UPC: 803102901103
EAN: 0803102901103
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | 50 psi 2-in-1 HVLP spray gun offers high atomization with low nozzle air pressure | | • | Better than 75% transfer efficiency with less than 10% psi output pressure | | • | 1.4-millimeter stainless nozzle for lighter materials; 2-millimeter stainless nozzle for heavier materials | | • | 1/4-inch air inlet | | • | Requires a 2 to 3 HP compressor (not included) |
|
| Similar Items:
| |
| Editorial Reviews:
Amazon.com Product Description
The Tool Force 50 psi 2-in-1 HVLP spray gun provides a better than 75-percent transfer efficiency with less than 10-percent psi output pressure. This spray gun features a 1.4-millimeter stainless nozzle for lighter materials and 2-millimeter stainless nozzle for heavier materials. It offers high atomization with low nozzle air pressure. The tool has a 1/4-inch air inlet and requires a 2-to-3 HP air compressor.
|
| Customer Reviews:
Showing reviews 1-5 of 6
Works Great!!! September 12, 2009
Lonnie Lagal
1 out of 1 found this review helpful
Works realy well once you get all your adjustments dialed in right. This gun works great with automotive type paints.
Terrific gun for spraying urethane August 22, 2009
Kay Hayes (San Jose, CA USA)
5 out of 5 found this review helpful
I picked up this gun to spray oil based urethane on my front doors. It was impossible to get a smooth and even finish with a brush with Varathane's satin urethane - I tried twice. So, although I have never used a spray gun, I deciced to give this one a try and see if I could get a satisfactory finish. I was not disappointed with the end result. The finish is far better than can be achieved with a brush. Just be prepaired for a little learning curve when learning to spray.
Internet searches will give you tips how to hold and move the gun, what tip sizes are needed for your type of work, pressure settings etc. Then practice on a piece of scrap. Even after doing all of this homework, I still managed to get a run on the first side of the first door. A little more experimenting revealed that I had the pressure too low (30 psi). I turned it up to 40 and presto! Easy spraying and a smooth finish. The information avaliable will tell you to use the lowest pressure possible but but my experience is don't be afraid to turn it up a bit for varnishes.
What I really liked about the gun:
- Great price
- Easy to clean (takes maybe 5 minutes - compare that to a big paint sprayer!)
- Has a pressure guage and adjustment at the gun. This is important because the pressure at the compressor may be different than the pressure at the end of the hose.
- You get two useful tip sizes
well built, affordable quality. April 13, 2009
C. Melton
1 out of 1 found this review helpful
use very little so far, but it appears well built, and a good value for the money.
Excellent January 30, 2008
Marcus A. Mitchell (Wooster Ohio)
3 out of 3 found this review helpful
I used this to spray water based poly on my oak bed I just built for us. Excellent results! This is my first time using a spray finish (usually just brush on) and I found this to be very effective in getting the finish just right.
SPRAY GUN May 6, 2007
G. BURKE (NE United States)
5 out of 5 found this review helpful
I AM QUITE SATISFIED WITH THIS GUN. IT WORKS GREAT AND DOES A QUALITY JOB. THIS WAS MY FIRST SPRAY GUN,SO I WAS SOMEWHAT SCEPTICAL. I AM NOW SATISFIED AFTER USING IT.
Showing reviews 1-5 of 6
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. Thanks for shopping with us! | |
