Paslode 900420 Cordless IMCT Framing Nailer

The highly visible, easy-to-access load magazine makes reloading quick and simple. View larger.

Batteries charge in under two hours for convenient, cord-free power. View larger.

Each red fuel cartridge drives up to 1200 nails (fuel cell not included). View larger.

Compact, Heavy-Duty Design Works Anywhere and Everywhere
Compact enough to work in tight, hard-to-reach areas, the IMCT Framing Nailer packs a powerful punch with heavy-duty construction that can handle tough job conditions. It shoots up to 1,200 nails on a single fuel cell and up to 4,000 nails on a full battery charge, providing a cycle rate of two to three nails per second. And because it offers tool-free depth-of-drive adjustment--no wrenches required!--you can get more done in less time.

Internal Combustion Linear Motor for Robust Performance
Unlike other power fastening tools, the IMCT Framing Nailer is powered by an internal combustion linear motor. In simpler terms, the nailer owes its robust performance to its motor, which is similar to an automobile's motor. Additionally, the tool ignites a fuel and air mixture to produce the energy needed to drive the motor, and ultimately, the fastener.

Patented Battery System for Consistency and Reliability
Another unique feature of this nailer is that it uses a patented system that requires both a fuel cell and a rechargeable battery (the fuel cell is not included). This translates to optimum consistency and reliability, whether you’re building a deck, working with wall sheathing, or repairing a roof. It also means the IMCT Framing Nailer is entirely self-contained. The tool carries its own fuel supply and battery--along with a supply of fasteners--making it easy to bring with you from site to site.

Lockout Feature to Prevent Blank Firing and Wood Damage
The IMCT Framing Nailer boasts a lockout feature to prevent needless blank cycling, which can waste fuel and damage both the wood you’re working with and the nailer's components. This feature works by ensuring that five nails will be left in the magazine when the follower reaches the lockout area. Additionally, the tool will not operate when its nail supply has less than six nails.

High-Visibility Magazine and Belt Hanger for Convenience
The IMCT Framing Nailer is designed to be exceptionally user friendly, with features that help keep your job running smoothly. First, the load magazine is highly visible, so it helps prevent you from running out of nails in the middle of a project. There’s also a convenient dual-position belt hanger, so you don't have to lay the nailer on the ground or on top of a ladder, nor do you have to wedge it among rafters. And if you can't remember where you last placed your nailer, its bright orange color makes it easy to spot.

About the Battery Charging System
The IMCT Framing Nailer comes with a rechargeable battery and its own charging system. This charging system is the only one that will work with Paslode batteries (both round and oval). When your tool arrives, you’ll first need to charge the battery. Batteries will generally take five minutes to two hours to recharge, depending on the amount of discharge within the battery.

Dimensions and Warranty Information
The IMCT Framing Nailer has a height of 14.5 inches and weighs 7.3 pounds. It comes with a one-year limited warranty on all parts, a five-year warranty on all molded nylon parts, and a 90-day limited warranty on the bumper, driver blades, O-rings, and seal rings.

What's in the Box
Nailer, 6.0-volt battery, charger, belt hanger, rugged plastic carrying case, safety goggles, manual, and 5/32-inch hex wrench.

The IMCT Framing Nailer is designed to for easy handling and reliable, professional performance.