Customer Reviews:
 Blades break too soon September 11, 2009
Gary Bruce
I purchased two of these blades. They are used only to cut very thin plastic. I was very careful in installing and adjusting the blades. I'm been around machine shops for over 40 years. I'm not new to adjusting bandsaws.
The first blade lasted maybe a total of 30 minutes of cutting. The second blade didn't last 10 minutes.
Other blades on the same saw have absolutely no problem. I have yet to have another blade break.
As with most bandsaw blades, these blades broke at the weld. My suspicion is that the weld was not annealed properly.
The blades cut very well while they last. They run very quiet and produce a smooth cut. Although we were cutting only straight cuts, I'm sure the narrow, 1/8" blade would allow some intricate cutting.
 Morse bandsaw blade January 25, 2009
John C. Taylor (Pendleton, OR USA)
1 out of 1 found this review helpful
I have found the Morse brand bandsaw blades to work better than the OEM blades that came with the saw. They appear to last longer, and to not fail as easily, as the OEM blades.
 Saw Blade June 27, 2008
Kenenth D. Rupkalvis (San Antonio, TX)
1 out of 13 found this review helpful
Of all the saw blades I have purchased, this is certinly one of them. It looks like a saw blade, it feels like a saw blade and it cuts like a saw blade, it must be a saw blade. However, I didn't tasted it. It did arrive quickly. It came in a very nice brown padded mailing envelope. I saved the envelope for wrapping Christmas presents this year. I only wish the blade would come in colors other then steel. I think a green blade might be nice.
This is an odd sized blade and I was very happy to find one.
|
