Wilton 99177 15 Amp 4-Inch Swing 12-Inch between Centers 2/5-Horsepower Mini Woodworking Lathe, 110-Volt 1 Phase |  | Brand: Wilton
Category: Home Improvement
List Price: $270.00
Buy New: $229.99
as of 11/25/2009 06:50 CST details
You Save: $40.01 (15%)
Rating:  24 reviews
Media: Tools & Hardware
Shipping Weight (lbs): 50.8
Dimensions (in): 28 x 7.7 x 13.2
Model: 99177
UPC: 019907991779
EAN: 0019907991779
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | 15 amp, 2/5-horsepower mini woodworking lathe | | • | 4-inch swing; 12 inches between centers; variable speed control (750 to 3,200 rpm) | | • | Cast iron bed and headstock for stability, durability | | • | Includes lathe, spur center, adjustable 6-inch tool rest, 6-inch and 2-1/2-inch faceplates | | • | 2-year warranty |
| |
| Editorial Reviews:
Amazon.com Product Description
Whether you're an experienced wood worker or just a beginner, the Wilton 99177 mini-lathe is the perfect tool for turning small projects such as pens, pencils, small bowls, bottle stoppers, ornaments and other spindle work. Ready to use right out of the box the 2/5 HP motor is powerful enough to remove materials fast and the variable speed control, 750 to 3200 rpm, with current feedback will maintain a constant speed under a load. Weighing in at around 50 pounds, the Wilton mini-lathe can be easily moved around the shop, home or garage. --C. Dwight Barnett
|
| Customer Reviews:
Showing reviews 1-5 of 24
 No parts available. April 11, 2009
L. Flory
I purchased this same item from Rockler in January, it quit 2 weeks ago and the repair shop says Wilton no longer makes this item and they no longer stock parts for it. The three year warranty is not worth the paper it is written on. Also Wilton customer service is a joke, they do not return calls or answer their phones. I,m currently working with Rockler for a refund.
 Happy Newbie September 6, 2008
D. R.
1 out of 1 found this review helpful
This lathe is the first tool I've seriously used for any kind of woodworking. So this is the first lathe I have ever used and I am very happy with it. That said, I highly recommend the Wilton mini-lathe for beginners. No assembly required, no fine tuning- I just turned it on and started wood-turning.
I bought the lathe to make chess pieces and I've made several already, even a knight (which I'll have to whittle a little for the horse's head). The speeds are perfect- as fast as I need to do details and whatnot, and slow enough to sand the pieces when finished. I've seen some lathes that don't have the variable speed knob- having one seems a huge plus for me.
Don't let anybody tell you you can't do faceplate work on it. I just made a beautiful little cup out of a sycamore branch using the small faceplate. It took me two days but I finally have a carefully cut cup about 4 inches in diameter, 4 inches high. For much of it, I used the live center in conjunction with the faceplate- you do have to be careful (my chisel got stuck and knocked the piece right out of its screws once or twice). It also comes with a large faceplate (5 1/2"?). I'll try to make a bowl with that next time.
Just to reiterate- I am a novice, I know nothing of other lathes and I am a beginner at wood-turning; I highly recommend this lathe to any beginner who might read this review.
A Real Gem July 15, 2008
Penturner (New England)
I was quite surprised by this lathe. Minor assembly was easy and straightforward, and center to center alignment was dead-on right out of the box. The "soft start" motor caused a little consternation when it didn't spin right away when I turned it on, but this is a really nice feature. Shaft play and runout are nearly non-existent, and the live center provided is more than acceptable. The variable speed control gives an adequate range of speeds for roughing, sanding and finishing.
I have used this lathe to turn many pens (the purpose for which I bought it) and it has exceeded my expectations. I have also done some small amount of face turning, and was well-pleased with the results. My only complaints are these: A little more power would not go unappreciated for face-turning; and the tailstock spindle grub screw tends to loosen up over time allowing the spindle just a little too much play.
For the price, an excellent lathe for pen and spindle turning; underpowered for larger face turning.
LITTLE WORKHORSE June 18, 2008
Chase (VILLA PARK,ILL.)
VERY SOLID IRON,8 INCH SWING THOUGH,WILL TURN BIG OR SMALL,SMALL OR BIG CHUCKS,ENOUGH SPEED,POWER FOR LITTLE HP.GREAT FINISHING LATHE.
 For the money, seems OK April 2, 2008
Larry J. Callander (Bennington, VT USA)
1 out of 1 found this review helpful
I bought and have used this lathe.
- in general, it's OK. It is a pen lathe, you won't be doing large work on it.
- tool rest was too high. Had to hack saw 3/8" to 1/2" from tool rest base, but that was easily doable in five minutes - there was plenty of metal under it. Don't understand why it was so high. Of course there is a height adjustment, but the lowest available was about the height of the turning axis. It needs to be able to go a little lower.
- there is a delayed start - after you switch it on there is a delay of 1-2 seconds and then it starts. This doesn't seem like a feature called 'soft-start', which my Makita router does; the Makita starts immediately and winds up to speed in a few seconds. This is just a delay. I'm wondering if it is a defect, but it runs OK otherwise.
- variable speed is nice, wish I had it on my Jet Mini lathe.
- if you want to turn pens, get the Morse taper mandrel (#1), not the screw-on type. The former allows the mandrel to slide into it, changing length based on the pen. The screw-on is constant length and you make up gaps by putting on more bearings. (either of these is a non-Wilton accessory)
If I had just one lathe, this wouldn't be it, but I have guys over (we make pens and sell them to benefit the relief arm of our church) and we needed the extra lathe capacity. For pens-only, it's OK.
LC
Showing reviews 1-5 of 24
|
|
|
